28
V
oice Sections
2
Turning the Electone off erases all panel settings you have made. When the Electone is turned on, Basic Registration 1 is automatically
selected.
If you have made panel settings you wish to keep, save them to Registration Memory (see page 77) before turning the Electone off.
You can, however, restore the panel settings that were made before the Electone was last turned off. See page 83 for more information.
About TO LOWER - Playing (Upper) Lead Voice and Pedal
Voice 1/2 from the Lower keyboard:
The Electone has a special “To Lower” function that lets you assign Lead
or Bass voices to the Lower keyboard. Simply press the TO LOWER
button on the voice section you wish to assign, and that voice will be
playable from the Lower keyboard.
LEAD VOICE
VIOLIN
FLUTE
OBOE
TRUM-
PET
TO
LOWER
BRILLIANCE
VOLUME
BRILLIANT
MELLOW
MAX
MIN
1
EL-700
BRILLIANCE
PEDAL VOICE 1
ELEC.
BASS
CONTRA
BASS
TUBA
ORGAN
BASS
TO
LOWER
VOLUME
BRILLIANT
MELLOW
MAX
MIN
1
EL-700
6
Adjust the volume balance between the Upper and Lower Voices
with the Balance Control provided on the Voice Display.
1.
Return to the Voice Display by pressing the VOICE DISPLAY
button in the DISPLAY SELECT section.
2.
Adjust the balance with the corresponding Data Control buttons.
Pressing this pair of Data
Control buttons at the same
time restores the balance to
the center position.
5
Now select voices for the Lower keyboard and Pedalboard as you did
for the Upper keyboard above. Also set the volumes of the voices.
When the TO LOWER button is
turned on, the Lead voices and Pedal
voices cannot be played on the Upper
keyboard and Pedalboard,
respectively.
NOTE:
The Lead and Pedal Voices sound one
note at a time; when you simultaneously
press two or more keys, only the highest
note will sound.
VOICE
EDIT
PATTERN SEQUENCE
RHYTHM
PROGRAM
L. FLUTE
VOICE
TREMOLO
(FAST)
U. FLUTE
VOICE
FOOT
SW.
REGIST.
SHIFT
EXP.
PITCH/MIDI
VOICE
DISPLAY
EFFECT
SET
A. B. C.
M. O. C.
DISPLAY SELECT
VOICE
EDIT
PATTERN SEQUENCE
RHYTHM
PROGRAM
TREMOLO
(FAST)
FOOT
SW.
REGIST.
SHIFT
PITCH/MIDI
VOICE
DISPLAY
EFFECT
SET
A. B. C.
M. O. C.
DISPLAY SELECT
EL-700
EL-500
About Mute function:
The voices of the four voice sections of the Upper keyboard (two in the
Lower and Pedal) sound together in a layer, and the balance of the
voices in the layer is determined by these VOLUME controls. You can
easily mute the voice of a voice section by holding down the COARSE
button and pressing the panel volume control of the voice section you
wish to mute. Repeating the procedure restores the original volume
setting.
COARSE
VOLUME
MAX
MIN
Actual
volume
setting
When muted
Summary of Contents for Electone EL-500
Page 1: ......