162
Appendix
14
Send the Registration Data from your PC to the EL-700/
500 and Change the Registration Memory Buttons
• Receiving the Registration Data
1
Send the Request-to-Receive all RAM message, “F0, 43, 70, 70, 20,
F7” (Hexadecimal), from the sequencing software (PC) to the EL-
700/500.
Once the EL-700/500 receive the Request-to-Receive all RAM
message, the EL-700/500 automatically receives all registration data
and relocates them to the all registration numbers.
• Selecting the Registration Memory Buttons
Sending the Program Change messages from the PC to your EL-700/500
makes it possible to change the registration on the EL-700/500.
2
Send the Program Change message, “CF, 00” (Hexadecimal) to the
EL-700/500.
Once the Program Change message is received, the EL-700/500
automatically turns the Registration Memory button 1 on.
• Sending the Note-On Messages
3
Send the Note-On message, “90, 30, 7F” (Hexadecimal) to the EL-
700/500.
The EL-700/500 receives the Note-On message and plays the C2 key
on the Upper Keyboard using the Strings 1 you have selected on the
previous page.
All the above operations can also be done with the M.D.R. easily and
efficiently. However, using the PC/ hard disk allows you to build up a
large data library a single disk cannot deal with.
Summary of Contents for Electone EL-500
Page 1: ......
