161
Appendix
14
System Messages
The System Messages are the data related to the overall system of the device.
System Exclusive Messages
System Exclusive messages are used to exchange the system and voice/
registration data. These allow you to execute bulk dump operation, sending
and receiving all the data of the EL-700/500 including registrations to and
from an external device. This is especially useful for you to build up the
library of the registration data in a device like a hard disk.
Examples of Exchanging the Data
Use the following examples to send (or receive) the registration data to
(or from) a personal computer (a sequencing software).
First, you need to connect your EL-700/500 with a personal computer
(a sequencing software) using a Serial Cable or a MIDI cable (page
158).
NOTE:
You also need a sequencing software,
which has been properly installed in the
personal computer, and which can send
and receive system exclusive messages.
Send the Registration Data from the EL-700/500 to
the Personal Computer (PC)
• Preparation
1
Set the Strings voice on the Upper Keyboard of the EL-700/500.
Press STRINGS button for the Upper Keyboard Voice 1 section,
and select String 1 from the Strings Menu.
2
Store the registration to the Registration Memory button 1.
While holding down the M. button Press the Registration Memory
button 1.
• Sending the Registration Data
3
Send the Request-to-Send all RAM message, “F0, 43, 70, 70, 10,
F7” (Hexadecimal), from the sequencing software (PC) to the EL-
700/500.
Once the EL-700/500 receive the Request-to-Send all RAM message,
the EL-700/500 automatically sends all registration data in the all
registration numbers to your PC. You can store the registration data
in a file on your PC.
NOTE:
Depending on the capacity of your
sequencing software, you may need to
divide the data into two and send them
to the PC separately.
Summary of Contents for Electone EL-500
Page 1: ......