Yamaha EF2200iS Owner'S Manual Download

Page: 58 / 72

7-2

Trouble recovery

Output indicator(s) do not come on

Overload indicator light does not turn off

The device(s) that had been working correctly before do not work

Multi-function LED meter flash or come on abnormally

Item

Check

Action

Page

Overload indicator
light

Does the overload indicator
light come on?

Make sure that the total watt-
age of connected device(s) is
within the rated range.

2-7

Is the overload indicator light
flashing?

Some malfunctions have been
detected. Consult a Yamaha
dealer.

—

The reset button does not
function even while the over-
load indicator light is coming
on.

Consult a Yamaha dealer.

—

Item

Check

Action

Page

Receptacle(s)

Are the device(s) plugged out
from the receptacle(s)?

Plug out any connected devic-
es from the receptacle(s).

—

Item

Check

Action

Page

Device(s)

Are you using an extension
cord?

Connect the device(s) directly
without using extension cords.

—

Do the device(s) stop due to a
voltage drop?

It is not recommended to use
devices that are sensitive to
voltage fluctuation. Also make
sure that the total wattage of
connected device(s) is within
the rated range.

4-7

Display

Check

Action

Page

Are some of the output in-
dicator(s) and overload in-
dicator light off even when
the engine is started?

Consult a Yamaha dealer.

—

Do the output indicator(s)
and the overload indicator
light come on for a few
seconds immediately after
starting the engine?

It is not a malfunction. The
multi-function LED meter is in
self-diagnostic mode.

—

7PC-F8199-U0-E0.book 2 ページ２０１９年５月２１日　火曜日　午後３時１１分

Summary of Contents for EF2200iS









































































Search results

Summary of Contents for EF2200iS

Reviews:

Related manuals for EF2200iS

Brands by name

Popular brands

Yamaha EF2200iS, Owner'S Manual

Search results

Summary of Contents for EF2200iS

Reviews:

Related manuals for EF2200iS

Brands by name

Popular brands