Yamaha EF2200iS, Owner'S Manual

Page: 50 / 72

5-10
Periodic maintenance
5. Wash the foam element with a foam air filter
cleaner and dry it.
6. Oil the foam element and squeeze out excess oil.
The foam element should be wet but not dripping.
7.
Insert the foam element into the air filter case.
TIP
Be sure the foam element sealing surface matches the
air filter so there is no air leak.
8. Install the air filter case cover in its original position
and tighten the screw.
9. Install the panel.
10. Finger-tighten the panel openers to engage the
lock (for Australia). Or install the screws (for
Europe).
Do not wring out the foam element when squeezing
it.
This could cause it to tear.
Recommended oil:
Foam air filter oil or equivalent oil
The engine should never run without the foam ele-
ment; excessive piston and cylinder wear may
result.
NOTICE
NOTICE
Panel screw tightening torque:
1.5 N·m (0.15 kgf·m, 1.1 lb·ft)
7PC-F8199-U0-E0.book 10 ページ ２０１９年５月２１日 火曜日 午後３時１１分