6
E
N
G
L
IS
H
SAFETY PRECAUTIONS
(8) Part No. G3907-88231
(11) Part No. G3907-88331
(13) Part No. G3907-88311 (AUS)
(9) Part No. 5450 801 1000
TO AVOID SERIOUS INJ URY
OR DEATH:
(1) TURN OFF GENERATOR
CIRCUIT BREAKER.
(2) TURN OFF ALL SWITCHES
ON ELECTRICAL LOAD.
(3) MAKE CERTAIN LOAD
CONNECTIONS AND POWER
CABLES ARE IN GOOD
CONDITION.
TO AVOID PERSONAL INJURY
OR EQUIPMENT DAMAGE
BEFORE STARTING ENGINE :
DO NOT OPERATE OR IDLE
IN NONVENTILATED AREAS,
CARBON MONOXIDE GAS IS
COLORLESS, ODORLESS
AND DEADLY.
DO NOT OPERATE IN WET
OR DAMP CONDITIONS.
WARNING
DA NGER
(10) Part No. 5450 968 1000
TO AVOID PERSONAL INJURY
REAR COVER
TERMINAL BLOCK
2
2
1
1
WARNING
WORK MUST BE CONDUCTED BY CERTIFIED PEOPLE.
FIRST, STOP THE ENGINE AND REMOVE STARTER KEY.
REMOVE THE NEGATIVE TERMINAL OF BATTERY AND CONDUCT THE WORK
TO AVOID AUTOMATIC STARTING BY THE SYSTEM.
ADVICE OF INSPECTION AND CLEANING - TO PREVENT A TR ACKING FAILURE.
IN DUSTY CONDITIONS, FOREIGN MATTER CAN ACCUMULATE ACROSS
THE TERMINAL BLOCK (2) OF THE GENERATOR.
HEN, WHEN IT GETS WET, ELECTRIC ARCING CAN OCCUR BETWEEN
AIN TERMINALS AND IT CAUSES A SHORT CIRCUIT OF MAIN TERMINALS.
TO PREVENT THE FAILURE, REMOVE THE REAR COVER (1), AND CHECK
FOR THE DUST AND MOISTURE ON THE TERMINAL BLOCK REGULARLY.
(CLEAN WITH APPROVED CLEANING AGENT OR MOISTURE DISPLACER.)
IN CASE ANY DISCOLORATION AND DEFORMATION OF THE TERMINAL
BLOCK, REPLACE WITH NEW TERMINAL BLOCK.
(12) Part No. 6C040-55591
9CN-9-U1-E0.indd 11
2013/11/19 13:50:44
Summary of Contents for EDL7000SE
Page 2: ......
