background image

RECOMMENDATION:

 If you are not familiar with Bluetooth 

pairing for your Smartphone or other Smart Device, refer to 
the User Guide for your Smartphone to learn how to add and 
pair a new device (the Underseat Bluetooth Subwoofer, for 
instance) to your Smartphone using Bluetooth.

Open Case

To open and access the waterproof case, grab the handle 
firmly and turn the lid, counter-clockwise.

Important: Maintaining Waterproofness

If the case is not properly closed, the unit is 

NOT

 watertight. 

To ensure the unit is watertight & waterproof, 

ALWAYS CLOSE 

THE CASE PROPERLY 

before use.

To close the lid properly, secure the lid into place, grab the 
handle firmly, and turn the lid clockwise.

Waterproof Case

This device complies with part 15 of the FCC Rules. Operation is subject to the 

condition that this device does not cause harmful interference (1) this device 

may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired 

operation.

Any changes or modifications not expressly approved by the party responsible 

for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for 

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular 

installation.

If this equipment does cause harmful interference to radio or television 

reception,

which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following 

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment 

should be installed and operated with minimum distance between 20cm the 

radiator your body: Use only the supplied antenna.

FCC ID: 2AAUI-GDIEXYMHSUB01

Summary of Contents for EcoxGear GDI-EXYMHSUB01









Reviews: