Wireless Connection with
Marine FX Speakers
This Subwoofer is designed to connect with one or a pair of
ECOXGEAR Marine FX Speakers, creating a complete audio
system. In order to transmit music to the Marine FX Speakers,
complete the following steps:
1.
Power on your Marine FX Speaker(s). If you choose to
pair both Marine FX Speakers, allow the two speakers to
complete the EcoConnect pairing process. (Refer to your
Marine FX Speakers user guide for details).
2. Press the Bluetooth button
on one of the Marine FX
Speakers, putting it into pairing mode.
3. Press Bluetooth Transmit button
on the subwoofer.
The Transmit icon will flash.
4. Available Bluetooth connections shall appear on the
subwoofer LCD screen. Use the
or
buttons to
select ECOXGEAR from the list of discovered devices,
if needed. Press
OK
to connect. Wait for a few seconds
until the connection is completed. The Transmit icon will
stop flashing and the Marine FX Speaker will announce,
“Connection successful.”
5. Pair your subwoofer to your smartphone.
NOTE:
The default wireless connection setting is <TWO
Speakers>. If only one speaker is connected to the subwoofer,
PRESS & HOLD
both
and buttons for approximately
5
seconds until <ONE Speaker> appears on the LCD screen.
Connecting With Bluetooth:
Connect To Your Smart Device & Play Audio
When your subwoofer is turned on, the Bluetooth icon
on
the LCD Display will flash, indicating that it is ready to pair.
Turn on Bluetooth on your Bluetooth device (Smart Device)
and set the device in pairing mode. Available Bluetooth
connections shall appear. Select SUB-ECOXGEAR from the
list of discovered devices on your Bluetooth device. Wait for a
few seconds until the connection is completed.
NOTE:
Bluetooth connection feature is found in the
Settings section of most mobile phones and other
Bluetooth enabled devices.
When the SUB-ECOXGEAR selection is made and the
Bluetooth connection is completed, the Bluetooth icon will
stop flashing.
Pairing Mode
If the Bluetooth icon is not flashing or if you wish to place your
subwoofer in pairing mode, press and release the Bluetooth
button
on the top panel. The Bluetooth icon will flash on
the LCD Display, indicating that the subwoofer is ready to pair.
NOTE:
Your subwoofer shall sync & wirelessly pair with
most Bluetooth enabled devices. The unit remembers the
last device paired and will automatically search for previous
connections when the subwoofer is turned on or when a
device comes back into Bluetooth range. If a connection is
lost due to range, the subwoofer will look to re-establish that
connection. If Bluetooth is turned off on your Smart Device,
the subwoofer may not automatically look for the device.
Pair and Connect Subwoofer to
your Smart Device
