You should never
1) Never charge your ECOXGEAR if you suspect water has entered the device. Charging a
device with water inside could be potentially hazardous and cause fire or a spark.
2) Never use your ECOXGEAR if you have dropped it or thrown it against a hard surface
which may have destroyed the integrity of the speakers, housings, or gaskets. In the event
of a severe impact to your unit please return the unit to Grace Digital to review for
potential
damage.
3) Never open the auxiliary door in a water environment. This could cause water to ingress
into the unit which could potentially be hazardous and cause a fire or a spark.
4) Never connect a device to the auxiliary input jack when in a water environment. The
auxiliary jack should only be used in a dry environment.
5) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for
any assessments and repairs.
CARE, MAINTENANCE, & PRECAUTIONS:
1) The unit is waterproof only when the cap is properly closed.
2) Close the cap properly before use. If the unit is placed in water without the cap properly
closed,
water
may
enter into the unit and void your warranty.
3) Dry unit completely before opening the cap. Do
NOT
open the cap if wet or in a
wet
environment.
4) Do
NOT
apply excessive force to any surfaces of the unit when wet or in a
wet
environment.
5) Do
NOT
use or store the unit in places with high temperature.
6)
AVOID
prolonged exposure to ultraviolet radiation (UV sunlight) and strong
magnetic
fields.
7) Periodically check the rubber seal for premature wear.
8) Periodically clean the rubber with a soft moist cloth and ensure no objects such as
dirt, hair, or sand are on the rubber seal ring. Do
NOT
use any oily solvent or chemicals
for
cleaning.
9) Rinse off the unit with tap water after use in salt water or swimming pool.
10) Power and / or charge the built-in rechargeable battery for portable use by connecting
the USB cord to a computer USB connection or to an AC outlet using the AC-to-USB
cord 5V, 1A power adapter intended for use with the unit.
11) Noise and audio distortion may occur when the batteries are nearing end of charge.
12) Do
NOT
remove the built-in battery. Do
NOT
remove the grill covers.
Once connected, select and play your desired audio.
Pairing Mode
If the LED is not flashing or if you wish to place your EX
Footwell speakers in pairing mode, press and release the
Bluetooth Button on the top panel. Your EX Footwell speakers
shall announce “Ready to connect” when ready to pair to a
new device.
NOTE:
Your EX Footwell speakers shall sync & wirelessly
pair with most Bluetooth enabled devices. The unit
remembers the last device paired and will automatically
search for previous connections when the speaker is turned
on or when a device comes back into Bluetooth range.
If a connection is lost due to range, the speaker will look
to re-establish that connection. If Bluetooth is turned off
on your Smart Device, the EX Footwell speakers may not
automatically look for the device.
RECOMMENDATION:
If you are not familiar with Bluetooth
pairing for your Smartphone or other Smart Device, refer to
the User Guide for your Smartphone to learn how to add and
pair a new device (EX Footwell speakers for instance) to your
Smartphone using Bluetooth.
Bluetooth Pairing & Connections
Once paired, should you have an issue switching between
Bluetooth connections between devices, open the Bluetooth
Section within the device currently connected to the EX
Footwell speakers and delete the Bluetooth connection.
The EX Footwell speakers will then be available to pair and
connect to an alternate Bluetooth enabled Smartphone /
Audio Device.
