If the speakers do not automatically pair when they are first
turned on,
PRESS & HOLD
on each speaker for 4 seconds.
Once the speakers emit a tone, follow the
Bluetooth Pairing
& Your Audio
instructions to connect one EX Footwell speaker
to your device. Leave this speaker powered on and connected
to your device.
Next, press the EcoConnect Button
on both of your
speakers. Both speakers will announce, “EcoConnect, pairing
speakers.” Wait approximately 4 seconds for the speakers to
wirelessly connect. Both speakers will announce, “
Speakers
paired.
” Then, the left speaker will announce, “Stereo mode,
left speaker,” the right speaker will announce, “Right speaker,”
and the EcoConnect backlight will shine
SOLID ORANGE
on
both speakers once the connection is completed.
If the left speaker does not announce, “Left speaker,” or the
right speaker does not announce, “Right speaker,” follow
these steps:
On one speaker,
PRESS & HOLD
the Bluetooth Button
until the speaker emits a tone. This indicates that the
EcoConnect - Wireless Stereo
Connection of Two Speakers
1
Bluetooth connections have been cleared. Do the same
on the other speaker.
PRESS & HOLD
the EcoConnect Button on either
speaker to cycle through the Speaker Channel Modes.
Each
PRESS & HOLD
of the button will change the
Speaker Channel Mode from Left, to Mono, to Right
mode. Repeat this until the left speaker announces,
“Left speaker,” and the right speaker announces,
“Right
speaker.”
Once the two speakers are connected via EcoConnect,
you will need to connect one EX Footwell speaker to
your device by following the
Bluetooth Pairing & Your
Audio
instructions.
After connection is complete, start playing music from your
device. Both connected speakers will play the music from
you device.
NOTE:
The EcoConnect feature works when paired to another
EcoConnect capable speaker with a distance of up to 30ft
from each other.
2
3
