E
4-4
EMU00338*
Flushing Cooling System and Fogging
Engine
Cooling system flushing is essential to
prevent the cooling system from clogging
up with salt, sand, or dirt. In addition, fog-
ging of the engine is mandatory to pre-
vent expensive engine damage due to
rust. Perform the flushing and fogging at
the same time.
w
8
Do not touch or remove electrical parts
when starting or during operation.
8
Keep hands, hair and clothes away
from flywheel and other rotating parts
while engine is running.
EMU00344
Flushing with the Flushing Device
w
Keep yourself and others away from the
propeller while engine is running.
c
C
Avoid running the outboard at high
speed while flushing, or overheating
could occur.
1)
Remove the top cowling and silencer
cover.
2)
Unscrew the garden-hose connector
2
from the bottom cowling fitting
1
.
3)
Screw the garden-hose connector
2
onto a garden-hose
3
which is con-
nected to a fresh-water supply.
4)
Open the water tap and let the water
flush through the cooling passages.
5)
Run the engine at an idle speed in
neutral for about 15 minutes.
q
w e
000843
67N-9-13-4 4/19/01 5:11 PM Page 5
Summary of Contents for DX150A
