Yamaha DTXTREME III Owner'S Manual Download

Page: 56 / 160

Saving the Created Data to a USB Storage Device

Quick Guide

DTXTREME III Owner’s Manual

Quic

k Guide

Loading a File Saved to a USB Storage Device

This section describes instructions on loading a file saved to a USB storage device as an “AllData” file.

Press the [FILE] button to enter the File mode.

Press the [F2] LOAD button to call up the Load display.

Move the cursor to the TYPE parameter, then set the File type to
“AllData” by using the data dial or the [INC/YES] and [DEC/NO]
buttons.

Press the Cursor [

] button to move the cursor to the file/direc-

tory select box, then select the desired file to be loaded.

If the file is saved under any directory, select the directory including the desired file,
then press the [ENTER/STORE] button to find the desired file.

Press the [SF1] EXEC to execute the Load operation.

After the data has been loaded, a “Completed” message appears and operation returns
to the original display.

• Loading a file (extension: T3A) to the DTXTREME III automatically erases and replaces all

existing data in the User memory. Make sure to save any important data to a USB storage
device before performing any Load operations.

While the data is being loaded, make sure to follow these precautions:

• Never remove or eject the media from the device (USB storage).

• Never unplug or disconnect any of the devices.

• Never turn off the power of the DTXTREME III or the relevant devices.

CAUTION

Summary of Contents for DTXTREME III

































































































































































Search results

Summary of Contents for DTXTREME III

Reviews:

Related manuals for DTXTREME III

Brands by name

Popular brands

Yamaha DTXTREME III, Owner'S Manual

Search results

Summary of Contents for DTXTREME III

Reviews:

Related manuals for DTXTREME III

Brands by name

Popular brands