Yamaha DTXTREME III Owner'S Manual Download

Page: 123 / 160

File Mode [FILE]

Reference

DTXTREME III Owner’s Manual

123

um Kit mode

Ref

erence

Song mode

Clic

k mode

igger mode

File mode

Utility mode

Chain mode

Sampling mode

Formatting USB Storage Media

[F5] FORMAT

Before you can use a new USB storage device with this instrument, you will need to format it. Follow the instructions below.

Connect a USB storage device to the USB
TO DEVICE terminal.

Press the [FILE] button to enter the File
mode, then press the [F5] FORMAT button
to call up the Format display.

Volume Label

Determines the name of the Volume Label. The Volume Label
is the name assigned to the USB storage device. The Volume
Label can contain up to 11 characters. For detailed instruc-
tions on naming, refer to “Basic Operation” on page 15.

[SF1] EXEC

Pressing this button executes the Format operation.

[SF6] LIST

You can call up the Character List by pressing this button.
Refer to “Using the character list,” page 15, for more informa-
tion on name entry.

Enter the name of the Volume Label as
desired.

Press the [SF1] EXEC button. (The display
prompts you for confirmation.)

Press the [DEC/NO] button to cancel the Format.

Press the [INC/YES] button to execute the
Format.

• Make sure there is no important data in the USB storage device before

formatting; otherwise all data will be deleted.

NOTE

• You can also format the USB storage device on the computer; however, for

best results and to avoid load/save errors, always use USB storage
devices that have been formatted on the DTXTREME III.

CAUTION

NOTE

• The format operation erases all data from the target memory device

and automatically creates an “AUTOLOAD” directory, see page 125.

Summary of Contents for DTXTREME III

































































































































































Search results

Summary of Contents for DTXTREME III

Reviews:

Related manuals for DTXTREME III

Brands by name

Popular brands

Yamaha DTXTREME III, Owner'S Manual

Search results

Summary of Contents for DTXTREME III

Reviews:

Related manuals for DTXTREME III

Brands by name

Popular brands