MENU Button
38
DTX-PRO DTX-PROX Reference Manual
Trigger (PRO) TRIGGER/SETTING (PROX)
Trigger (DTX-PRO) TRIGGGER/SETTING (DTX-PROX)
This section explains the “
Trigger
” settings in the menu on the DTX-PRO and the Trigger mode of the DTX-PROX. The characteristics of the
trigger signals output from pads when they are played depend on a range of different pad design factors.
The “Trigger” settings allow you to optimize trigger signals for each pad for processing by the PRO series modules.
Select the appropriate pad type when you add or change pads. When you connect the pad to the [
!2
KICK/
!32
] jack, [
y
TOM3/
u
] jack,
[
r
TOM2/
t
] jack or [
w
TOM1/
e
] jack, make sure to change the input mode.
With the DTX-PROX, you can change the trigger settings using the button below “SETTING” ([F3]). Settings need to be stored after being
changed.
In this section, the screen examples are from the DTX-PRO.
TRIGGER/SETTING/Input Mode
Input Mode
Sets how to use the mono × 2 input jack. Select “
paired
” when using a Drum Trigger (DT50S) or similar device.
MENU/Trigger
MENU/Trigger/Input Mode
Screen
Parameter
Settings
Description
Tom1/Pad3
paired
,
separate
Sets the [
w
TOM1/
e
] jack to use
w
TOM1 and
e
trigger inputs as a set or separately.
Tom2/Pad5
Sets the [
r
TOM2/
t
] jack to use
r
TOM2 and
t
trigger inputs as a set or separately.
Tom3/Pad7
Sets the [
y
TOM3/
u
] jack to use
y
TOM3 and
u
trigger inputs as a set or separately.
Kick/Pad13
Sets the [
!2
KICK/
!3
] jack to use
!2
KICK and
!3
trigger inputs as a set or separately.
TRIGGER
TRIGGER/SETTING
PRO
PROX
PROX
