RX-N600/RX-N600D/HTR-N5060/
DSP-N600
20
RX-N600/RX-N600D/
HTR-N5060/DSP-N600
When checking the P.C.B.:
• Put a cloth over the equipment. Put the P.C.B.s together with the heat sink upright on the cloth and check them. (Fig. 6)
• Reconnect all cables (connectors) that have been disconnected.
• When connecting the flat cable, use care for the polarity.
• The P.C.B. removed from the chassis does not work because its grounding is loose. Be sure to connect the ground of rear
panel, MAIN (1) P.C.B. (G1001) and OPERATION (4) P.C.B. (G3001) to the chassis with a ground lead or the like.
Fig. 5
Fig. 6
9. Removal of MAIN (1), (2), (4) and (5) P.C.B.s
a. Remove the Artbase/P.C.B.. (Fig. 5)
b. Remove 2 screws (
G
), 1 screw (
H
), 2 screws (
I
) , 1 screw (
J
). (Fig. 5)
c. Remove 5 screws (
K
). (Fig. 4)
d. Remove CB103, CB104, CB105 (U, C models), CB331 and CB395. (Fig. 3)
e. Remove MAIN (1), (2), (4) and (5) P.C.B.s together with the Heat Sink. (Fig. 5)
J
H
G
G
I
TUNER
Heat Sink
Artbase / P.C.B.
MAIN (1) P.C.B.
MAIN (2) P.C.B.
MAIN (4) P.C.B.
MAIN (5) P.C.B.
Cloth
Ground Lead
Ground Lead
G3001
G1001
MAIN (1) P.C.B.
OPERATION (4) P.C.B.
Summary of Contents for DSP-N600
Page 93: ...A B C D E F G H I J 1 2 3 4 5 6 7 RX N600 RX N600D HTR N5060 DSP N600 93 VIDEO P C B Side B ...
Page 96: ...RX N600 RX N600D HTR N5060 DSP N600 96 MEMO MEMO MEMO MEMO ...
Page 140: ...RX N600 RX N600D HTR N5060 DSP N600 140 ...
Page 141: ...RX N600 RX N600D HTR N5060 DSP N600 141 RX N600 RX N600D HTR N5060 DSP N600 ...
