61
Programming a recording (TIMER)
Problem solving for programmed
recordings
PROBLEM
SOLUTION
The DVD recorder is not responding
✓
While a programmed recording is being made, you cannot operate your DVD
recorder manually. If you want to cancel the programmed recording, press
B
/I
.
“
Switch off, timer recording
” flashes on the
TV screen.
✓
The DVD recorder was switched on several minutes before the start of a pro-
grammed recording. Switch off the DVD recorder using
B
/I
. A programmed
recording (timer) will only function if the DVD recorder is switched off (
B
/I
but-
ton).
Error message: “
Insert recordable disc
”
✓
Either a disc has not been inserted or the disc cannot be used for recording. Insert
a disc on which recordings can be made. Switch off the DVD recorder using
B
/I
.
The error message “
Disc locked
” appears
briefly on the screen.
✓
A write-protected disc has been inserted. Undo the write protection (see “Pre-
venting accidental erasing of discs” in “Manual recording”) or insert a different disc.
Error message:
“
Memory full
”
✓
If this error message appears after pressing
TIMER
, then all TIMER blocks are
already programmed. No more recordings can be programmed. Press the
u
button.
If you want to clear or check a programmed recording (TIMER block), select it with
v
or
w
.
The “
Data error
” message appears on the
screen.
✓
The data for the recording could not be transferred. Please check date, start time
and end time of the programmed recording.
The “
Collision
” message appears on the
screen.
✓
Two programmed recordings overlap.
✓
If you ignore this error message the show with the earlier start time will be
recorded first. The start of the second show will not be recorded.
✓
Change the setting for either of the two recordings.
✓
Clear either of the two recordings
DRX-2̲G.book Page 61 Tuesday, October 14, 2003 5:02 PM
