49
Manual recording
7
Confirm with
ENTER/OK
.
8
Use a scart cable to connect scart socket
EXT 2 AUX-I/O
on the DVD
recorder to the corresponding scart socket on the satellite receiver.
9
To end, press
SYSTEM-MENU
.
0
Insert a disc you want to use for recording.
A
Programme the satellite receiver with the required information
(programme number of the TV channel, start time, end time).
If necessary, please see the operating instructions for your satellite receiver.
B
Switch off the DVD recorder using
B
/I
. “SAT” also appears in the display to indi-
cate that the function is active.
The DVD recorder is now ready to record. The start and end of the recording is con-
trolled via scart cable
EXT 2 AUX-I/O
.
Can you record the right TV channel in seconds when the DVD recorder is switched
off? No problem. If recording is started manually, the
switched-off
DVD recorder
takes the current TV channel from the TV set via the scart cable.
You will find more information on how to switch “Direct record” on or off in the next
section “Direct record”.
1
On the TV set, select the programme number you want to make the recording
from.
2
Press
REC
S
with the DVD recorder
switched off
.
3
Stop recording with
STOP
.
Tip
Switching off “Sat Recording”
To switch off the function, select “
Off
” using
u
or
t
.
Direct Record
Question
How does Direct Record work?
The DVD recorder compares the TV channel selected on the TV set with its stored
TV channels via the scart cable. If the same TV channel is found, it switches the
DVD recorder to the corresponding programme number and starts recording.
Please do not change channel on the TV during the search. This could affect the tun-
ing of the DVD recorder.
Problem
✘
The display will read “WAIT”
✓
The DVD recorder is comparing its saved TV channels with those of the TV set.
Please do not change the TV channel on the TV set while “WAIT” is shown in
the display.
✘
“NOTV” appears in the display
✓
This TV channel could not be found in the DVD recorder’s memory.
Check that all TV channels saved on the TV set are available on the DVD
recorder. If required, save any missing channels. Please read “Manual TV channel
search” in “Installing your DVD recorder”.
✓
Check the connectors at both ends of the scart cable.
✓
Check your TV’s operating instructions to see which scart socket is used for
video signals.
✓
If the problem persists, you won’t be able to use this feature.
DRX-2̲G.book Page 49 Tuesday, October 14, 2003 5:02 PM
