![background image](http://html.mh-extra.com/html/yamaha/dm-2000-version-2/dm-2000-version-2_service-manual_896482042.webp)
DM2000
42
Rear assembly U
[60E] x 7
[60A]
[60C] x 7
Control panel assembly
Side panel L
<Rear view>
<Front view>
<Top view>
<Left side view>
<Right side view>
Bottom assembly
[60D]
[60A]
[60B] x 8
Side panel R
[60D]
Fig.2
[60]: Bind Head Tapping Screw-B
A4.0X8 MFZN2BL (VC688800)
Photo.3
Control panel assembly
Front stay
Photo.4
Rear assembly U
Rear stay
Photo.5
4.
Rear Assembly U
(Time required: About 15 minutes)
4-1.
Remove the SP2000. (See procedure 1.)
4-2.
Remove the MB2000. (See procedure 2.)
4-3.
Fasten the control panel assembly. (See procedure 3.)
4-4.
Remove the two (2) screws marked [60D] and the
seven (7) screws marked [60E]. (Fig.2)
4-5.
Lift the rear assembly U from the rear side and fasten
them by the two (2) rear stays. (There are two ways
of using the rear stays shown in the photo 4 or 5.)
Summary of Contents for DM 2000 Version 2
