Instrument an
d
control functions
3-17
3
EAU55512
Fuel tank
b
reather hose an
d
overflow hose
Before operating the motorcycle:
Check each hose connection.
Check each hose for cracks or
damage, and replace if necessary.
Make sure that the end of each
hose is not blocked, and clean if
necessary.
Make sure that each hose is rout-
ed through the clamp.
Make sure that the paint mark on
each hose is below the clamp.
EAU13434
Catalytic converter
This model is equipped with a catalytic
converter in the exhaust system.
WARNING
EWA10863
The exhaust system is hot after op-
eration. To prevent a fire hazar
d
or
b
urns:
Do not park the vehicle near
possi
b
le fire hazar
d
s such as
g
rass or other materials that
easily
b
urn.
Park the vehicle in a place
where pe
d
estrians or chil
d
ren
are not likely to touch the hot
exhaust system.
Make sure that the exhaust sys-
tem has coole
d
d
own
b
efore
d
oin
g
any maintenance work.
Do not allow the en
g
ine to i
d
le
more than a few minutes. Lon
g
i
d
lin
g
can cause a
b
uil
d
-up of
heat.
NOTICE
ECA10702
Use only unlea
d
e
d
g
asoline. The use
of lea
d
e
d
g
asoline will cause unre-
paira
b
le
d
ama
g
e to the catalytic
converter.
1. Fuel tank breather hose and overflow hose
2. Clamp
3. Original position (paint mark)
1
1
2
3
UBS1E0E0.book Page 17 Thursday, October 8, 2015 3:40 PM