Yamaha diversion F Owner'S Manual Download Page 48

Page: 48 / 104

Perio

ic maintenance an

justment

6-3

EAU46862

TIP



The annual checks must

e performe

every year, except if a kilometer-

ase

maintenance, or for the UK, a milea

ase

maintenance, is

performe

instea



From 50000 km (30000 mi), repeat the maintenance intervals starting from
10000 km (6000 mi).



Items marked with an asterisk should be performed by a Yamaha dealer as
they require special tools, data and technical skills.

EAU63321

Perio

ic maintenance chart for the emission control system

NO.

ITEM

Fuel line

• Check fuel hoses for cracks or

damage.

√

Spark plu

• Check condition.
• Clean and regap.

√

• Replace.

√

Valves

• Check valve clearance.
• Adjust.

Every 40000 km (24000 mi)

Fuel injection

• Adjust engine idling speed and

synchronization.

√

Air in

uction sys-

tem

• Check the air cut-off valve, reed

valve, and hose for damage.

• Replace the entire air induction

system if necessary.

√

X 1000 km

CHECK OR

MAINTENANCE JOB

X 1000 mi

ODOMETER

READINGS

ANNU

AL CHECK

0.6

UBS1E0E0.book Page 3 Thursday, October 8, 2015 3:40 PM

Summary of Contents for diversion F









































































































Search results

Summary of Contents for diversion F

Reviews:

Related manuals for diversion F

Brands by name

Popular brands

Yamaha diversion F, Owner'S Manual

Search results

Summary of Contents for diversion F

Reviews:

Related manuals for diversion F

Brands by name

Popular brands