DU1A
61
Tone Generator (Ensemble Playback)
During Ensemble song playback, the Ensemble parts
cannot be heard.
• Make sure that the amp’s volume control is set to an
appropriate level.
• Readjust the volume balance.
The pitch of the Disklavier and internal XG tone
generator do not match.
• Use the TG Master Tune function to tune the internal XG
tone generator.
The TG Master Balance function does not adjust the
volume of the internal XG tone generator.
• Make sure that the BALANCE parameter is set to OFF.
Recording
When recording the second part of an L/R song, the first
part will not play back for monitoring.
• Set the Monitor Piano option to ON.
When recording a new part to an existing track, the new
part replaces the existing parts.
• Set the Record Tr option to OVERDUB.
You cannot re-record.
• Re-recording is not possible on protected disks such as
PianoSoft and PianoSoft·Plus disks.
Connection with External Devices
The Disklavier cannot send and receive MIDI data with
other MIDI instruments.
• Make sure the MIDI cables are connected properly.
A MIDI loop was accidentally created when you
connected a computer to the MIDI OUT connector on
your Disklavier, so that song data is sent back and forth
between the computer and and piano.
• Set MIDI Out to KBD Out.
Disk Utilities
You cannot copy a song in the Memory Disk onto a floppy
disk.
• Copy-protected songs in the Memory Disk cannot be copied
onto a floppy disk. They can only be copied onto the Memory
Disk.
• Make sure that the floppy disk’s erasure tab is set to
“unprotected.”
