Yamaha Disklavier Silent Mark III Service Manual Download Page 56

Page: 56 / 151

DU1A

1.00

KS1
02.04.04

SENSOR

KEY NUMBER= XX

TEST

KEY NUMBER= XX OFF

SENSOR SHEET TEST

PK-CTL SHEET TEST

02. 03. 11

→

S=020 L=009

SW Type ON

Cleared

EEP ROM!!

OK!

Vol Type 000%

• PK-CTL sheet test screen

• Version No. display

• Pedal-sensing data display
   The data will be displayed after depressing the pedals.
   (S: Shift pedal/L: Loud pedal)
• Foot controller test
   Switch type: ON (depress)/OFF (release)
   Volume type: 30 ~ 100% (use the foot pedal)

• PK-CTL sheet ROM test

• PK-CTL sheet RAM test

• PK-CTL sheet EEP-ROM test
(Memory data will not be deleted.)

• PK-CTL sheet EEP-ROM clear

∗

Memory data will be deleted.

• SENSOR sheet test screen

• Version No. display

• Key sensor measurement display
The measurement of each depressed key will be displayed.

• Key sensor output test (Not used in the field.)

• Key sensor positioning
Check that the key goes ON when depressed 4.5 mm

0.5 mm from the rest position.

Buzzer sound (intermittent)/Key No. display

• Hammer sensor positioning
0.5 mm

1.5 mm from the shank stopper Buzzer sound/ON display

Press the Selector button four (4) times.

1 [VOLUME]
2 [TEMPO]
3 [TRANSPOSE]
4 [BALANCE]

Summary of Contents for Disklavier Silent Mark III
























































































































































Search results

Summary of Contents for Disklavier Silent Mark III

Reviews:

Related manuals for Disklavier Silent Mark III

Brands by name

Popular brands

Yamaha Disklavier Silent Mark III, Service Manual

Search results

Summary of Contents for Disklavier Silent Mark III

Reviews:

Related manuals for Disklavier Silent Mark III

Brands by name

Popular brands