IMPORTANT SAFETY INSTRUCTIONS
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,
AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING
— When using any electrical or electronic
product, basic precautions should always be followed.
These precautions include, but are not limited to, the
following:
1. Read all Safety Instructions, Installation Instructions,
Special Message Section items, and any Assembly
Instructions found in this manual BEFORE making any
connections, including connection to the main supply.
2. Main Power Supply Verification: Yamaha products are
manufactured specifically for the supply voltage in the
area where they are to be sold. If you should move, or if
any doubt exists about the supply voltage in your area,
please contact your dealer for supply voltage verification
and (if applicable) instructions. The required supply
voltage is printed on the name plate. For name plate
location, please refer to the graphic found in the Special
Message Section of this manual.
3. This product may be equipped with a polarized plug
(one blade wider than the other). If you are unable to
insert the plug into the outlet, turn the plug over and try
again. If the problem persists, contact an electrician to
have the obsolete outlet replaced. DO NOT defeat the
safety purpose of the plug.
4.
DANGER
— Grounding Instructions: Disklavier
Grand must be grounded and therefore has been equipped
with a three pin attachment plug. If this product should
malfunction, the ground pin provides a path of low
resistance for electrical current, reducing the risk of
electrical shock. If your wall socket will not accommodate
this type plug, contact an electrician to have the outlet
replaced in accordance with local electrical codes. Do
NOT modify the plug or change the plug to a different
type!
5.
WARNING:
Do not place this product or any other
objects on the power cord or place it in a position where
anyone could walk on, trip over, or roll anything over
power or connecting cords of any kind. The use of an
extension cord is not recommended! If you must use an
extension cord, the minimum wire size for a 25' cord (or
less) is 18 AWG. NOTE: The smaller the AWG number,
the larger the current handling capacity. For longer
extension cords, consult a local electrician.
6. Ventilation: Electronic products, unless specifically
designed for enclosed installations, should be placed in
locations that do not interfere with proper ventilation. If
instructions for enclosed installations are not provided, it
must be assumed that unobstructed ventilation is required.
7. Temperature considerations: Electronic products should
be installed in locations that do not significantly contribute
to their operating temperature. Placement of this product
close to heat sources such as; radiators, heat registers and
other devices that produce heat should be avoided.
8. This product was NOT designed for use in wet/damp
locations and should not be used near water or exposed
to rain. Examples of wet/damp locations are; near a
swimming pool, spa, tub, sink, or wet basement.
9. This product should be used only with the components
supplied or; a cart, rack, or stand that is recommended
by the manufacturer. If a cart, rack, or stand is used, please
observe all safety markings and instructions that
accompany the accessory product.
10. The power supply cord (plug) should be disconnected
from the outlet when electronic products are to be left
unused for extended periods of time. Cords should also
be disconnected when there is a high probability of
lightning and/or electrical storm activity.
11. Care should taken that objects do not fall and liquids
are not spilled into the enclosure through any openings
that may exist.
12. Electrical/electronic products should be serviced by
a qualified service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have
been spilled into the enclosure through openings;
or
c. The product has been exposed to rain; or
d. The product does not operate, exhibits a marked
change in performance; or
e. The product has been dropped, or the enclosure
of the product has been damaged.
13. Do not attempt to service this product beyond that
described in the user-maintainance instructions. All other
servicing should be referred to qualified service
personnel.
14. This product, either alone or in combination with an
amplifier and headphones or speaker/s, may be capable
of producing sound levels that could cause permanent
hearing loss. DO NOT operate for a long period of time
at a high volume level or at a level that is uncomfortable.
If you experience any hearing loss or ringing in the ears,
you should consult an audiologist. IMPORTANT: The
louder the sound, the shorter the time period before
damage occurs.
15. Some Yamaha products may have benches and/or
accessory mounting fixtures that are either supplied as a
part or the product or as optional accessories. Some of
these items are designed to be dealer assembled or
installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured
BEFORE using. Benches supplied by Yamaha are
designed f or seating only. No other uses are
recommended.
PLEASE KEEP THIS MANUAL
92-469-DK
2
Summary of Contents for Disklavier Mark III Series
Page 1: ......
Page 7: ...Mark III Series Playback Models Operation Manual ...
