Yamaha Disklavier DGC1B Basic Operation Manual Download Page 4

Page: 4 / 74

PLEASE KEEP THIS MANUAL

92-469-DK

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,

AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.

WARNING

— When using any electrical or electronic prod-

uct, basic precautions should always be followed. These pre-
cautions include, but are not limited to, the following:

Read all Safety Instructions, Installation Instructions,
Special Message Section items, and any Assembly

Instructions found in this manual BEFORE making any
connections, including connection to the main supply.

Main Power Supply Verification: Yamaha products are
manufactured specifically for the supply voltage in the

area where they are to be sold. If you should move, or if any
doubt exists about the supply voltage in your area, please con-
tact your dealer for supply voltage verification and (if appli-
cable) instructions. The required supply voltage is printed on
the name plate. For name plate location, please refer to the
graphic found in the Special Message Section of this manual.

This product may be equipped with a polarized plug (one
blade wider than the other). If you are unable to insert

the plug into the outlet, turn the plug over and try again. If the
problem persists, contact an electrician to have the obsolete
outlet replaced. DO NOT defeat the safety purpose of the plug.

DANGER

— Grounding Instructions: Disklavier Grand

must be grounded and therefore has been equipped with

a three pin attachment plug. If this product should malfunction,
the ground pin provides a path of low resistance for electrical
current, reducing the risk of electrical shock. If your wall socket
will not accommodate this type plug, contact an electrician to
have the outlet replaced in accordance with local electrical
codes. Do NOT modify the plug or change the plug to a
different type!

WARNING:

Do not place this product or any other

objects on the power cord or place it in a position where

anyone could walk on, trip over, or roll anything over power
or connecting cords of any kind. The use of an extension cord
is not recommended! If you must use an extension cord, the
minimum wire size for a 25' cord (or less) is 18 AWG. NOTE:
The smaller the AWG number, the larger the current handling
capacity. For longer extension cords, consult a local electrician.

Ventilation: Electronic products, unless specifically
designed for enclosed installations, should be placed in

locations that do not interfere with proper ventilation. If
instructions for enclosed installations are not provided, it must
be assumed that unobstructed ventilation is required.

Temperature considerations: Electronic products
should be installed in locations that do not significantly

contribute to their operating temperature. Placement of this
product close to heat sources such as; radiators, heat registers
and other devices that produce heat should be avoided.

This product was NOT designed for use in wet/damp
locations and should not be used near water or exposed

to rain. Examples of wet/damp locations are; near a swimming
pool, spa, tub, sink, or wet basement.

This product should be used only with the components
supplied or; a cart, rack, or stand that is recommended

by the manufacturer. If a cart, rack, or stand is used, please
observe all safety markings and instructions that accompany
the accessory product.

The power supply cord (plug) should be disconnected
from the outlet when electronic products are to be left

unused for extended periods of time. Cords should also be
disconnected when there is a high probability of lightning
and/or electrical storm activity.

Care should taken that objects do not fall and liquids
are not spilled into the enclosure through any openings

that may exist.

Electrical/electronic products should be serviced by a
qualified service person when:

a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have

been spilled into the enclosure through openings; or

c. The product has been exposed to rain; or
d. The product does not operate, exhibits a marked

change in performance; or

e. The product has been dropped, or the enclosure of

the product has been damaged.

Do not attempt to service this product beyond that
described in the user-maintainance instructions. All other

servicing should be referred to qualified service personnel.

This product, either alone or in combination with an
amplifier and headphones or speaker/s, may be capable

of producing sound levels that could cause permanent hearing
loss. DO NOT operate for a long period of time at a high
volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should
consult an audiologist. IMPORTANT: The louder the sound,
the shorter the time period before damage occurs.

Some Yamaha products may have benches and/or
accessory mounting fixtures that are either supplied as

a part or the product or as optional accessories. Some of these
items are designed to be dealer assembled or installed. Please
make sure that benches are stable and any optional fixtures
(where applicable) are well secured BEFORE using. Benches
supplied by Yamaha are designed for seating only. No other
uses are recommended.