Yamaha DG-Stomp, Owner'S Manual

Page: 14 / 32

14
Using the DG-Stomp
When another patch is selected, any set-
tings you have altered will revert to their
original settings.
If you want to save those settings, please
use the Store operation described on page
17.
●
Set the Speaker Simulator
The speaker simulator is a special circuit that adds
the live characteristics of a speaker to the tone out-
put of the DG-Stomp. It is best used when you are
listening through a pair of headphones or when con-
nected directly via a line to a mixer or recorder.
Press the [SP. SIM] button to turn the Speaker Simu-
lator ON (the lamp will light). Press the button again
to turn the Speaker Simulator OFF (light is off).
Also, the DG-Stomp is equipped with 16 types of
speaker simulations. Try to find a simulation you like.
1. Simultaneously press the [SP. SIM] button and
the [UTILITY] button.
After “
SP.S
” appears in the display, the currently
selected simulation type will be displayed. The
four types of simulation are as follows.
•
A42
: American Style 12-inch x4
•
b42
: British Style 12-inch x4
•
m42
: Modern 12-inch x4
•
Y42
: YAMAHA 12-inch x4
•
H42
: Hybrid 12-inch x4
•
A22
: American Style 12-inch x2
•
b22
: British Style 12-inch x2
•
m22
: Modern 12-inch x2
•
Y22
: YAMAHA 12-inch x2
•
H22
: Hybrid 12-inch x2
•
A12
: American Style 12-inch x1
•
m12
: Modern 12-inch x1
•
Y12
: YAMAHA 12-inch x1
•
H12
: Hybrid 12-inch x1
•
410
: 10-inch x4
•
210
: 10-inch x2
2. Use the [UP]/[DOWN] buttons to select the simu-
lator type.
3. Press the [UTILITY] button to return to the PLAY
mode.
* The speaker simulator’s setting is stored along with the patch
data. It is also possible to use Utility settings to turn the
speaker simulator ON or OFF independent of the patch data
settings (see page 27)
* If the MASTER volume or tone controls are set relatively high,
the sound may clip when the Speaker Simulator circuit is ac-
tivated. If so, slightly lower the MASTER volume level.