MAINTENANCE
■
■
■
■
■
Check front fork
The motorcycle shall be securely
supported when being checked, so
that it would not fall over.
1.Visual examination
Check the inner tubes for scratches,
damages or oil leakage.
2.Action examination
Pull the motorcycle to a flat place.
a.Hold the handlebar and keep the
motorcycle upright, grasp the front and
rear brake lever to avoid slipping when
checking.
b.Actuate the handlebar up and right
for several times to check the action
of front fork.
CAUTION:
If you find any damage, oil leakage
or malfunction, ask your agency to
check it.
■
■
■
■
■
Check steering system
Worn or loose steering bearings may
cause danger. Place a stand under the
engine to raise the front wheel off
ground. Hold the lower ends of the
front fork and move them forward and
backward. If any free play can be felt,
ask your agency to check it.
WARNING
Make sure that the motorcycle
stands steadily when checking the
steering system to avoid hazard.
Fuse specification: 15A
■
■
■
■
■
Replace fuse
1.Remove the cover of accumulator.
2.Remove the negative terminal (-) and
positive terminal (+), then you can
take out the fuse.
3.Replace the blown fuse.
CAUTION:
Do not use fuses of a higher amper-
age rating than recommended to
avoid extensive damages to the elec-
trical system, which may result in
fire.
WARNING
7-9
Summary of Contents for CYGNUS RS XC125E
