65
F
e
a
t
u
r
e
R
e
f
e
r
e
n
c
e
U
t
ilit
y
M
o
d
e
n
Press a [SCENE] button to display the Scene Control parameters.
2. Press ASSIGN CTRL NO [UP/DOWN] button to select the Control
Change Number and Name.
3. Repeat steps 1 and 2 to assign the Control Change Numbers and
Names to each controller.
n
This function is especially convenient for controlling an external
MIDI device with the CS2x (see page 72).
About The SOUND CONTROL Knobs
Changes made by the SOUND CONTROL knobs can be output
as MIDI messages via the MIDI OUT terminal as assigned using
the ASSIGN CTRL NO function.
The default assignments for the SOUND CONTROL knobs as
set at the factory are as follows:
Knob 1
73: Attack Time
Knob 2
80: General Purpose 5
Knob 3
72: Release Time
Knob 4
17: General Purpose 2
Knob 5
81: General Purpose 6
Knob 6
74: Brightness
Knob 7
71: Harmonic Content
Knob 8
18: General Purpose 3
• When the CS2x receives the data assigned to each SOUND
CONTROL knob from an external MIDI device, the
parameter printed on the panel for the knob will be affected.
For example, when the message for Brightness (74) is
received from an external device, the Attack Time will be
affected when the Brightness (74) is assigned to Knob 1 and
the Attack Time (73) is assigned to Knob 3.
• Both the data assigned to the Knob using the ASSIGN CTRL
NO function and parameter data as printed on the panel for
the Knob are sent to the internal tone generator when turning
the Knob. For example, when you turn Knob 1, both
Brightness (74) and Attack Time will be affected when
Brightness (74) is assigned to Knob 1.
The table below lists the Control Change Numbers and
Names that can be assigned to the various controllers.
n
General Purpose:
With the CS2x, General Purpose 1 is for FC, 2 is
for Knob 4 (ASSIGN 1/DATA), 3 is for Knob 8 (ASSIGN 2), 4 is for
no setting, 5 is for Knob 2 (DECAY), 6 is for Knob 5 (HPF CUTOFF)
and 7 and 8 are for no setting.
Assigning The Controllers
1. Move the panel controller (i.e. a SOUND CONTROL knob or the
MODULATION wheel) to which the Control Change Number is to
be assigned. The parameters for the controller will appear in the
LCD.
Control Change Number
Name
LCD
1
Modulation Depth
ModDpth
5
Portament Time
PortaTm
6
Data Entry MSB
DataMSB
7
Main Volume
MainVol
10
Panpot
Panpot
11
Expression
Expres.
16
General purpose1
Generl1
17
General purpose2
Generl2
18
General purpose3
Generl3
19
General purpose4
Generl4
38
Data Entry LSB
DataLSB
64
Hold 1(Damper/Sustain) Hold1
65
Portament Switch
PortaSW
66
Sostenute
Sostnut
67
Soft Pedal
Soft
71
Harmonic Contents
Harmonic
72
Release Time
RelTime
73
Attack Time
AtkTime
74
Brightness
Bright.
80
General Purpose 5
Generl5
81
General Purpose 6
Generl6
82
General Purpose 7
Generl7
83
General Purpose 8
Generl8
84
Portament Control
PortaCt
91
Reverb Depth
Reverb
93
Chorus Depth
Chorus
94
Variation Depth
Vari
Others
-------
-------
Assignable Control Change Numbers and Names
cCS2x_Ref 12/10/98 5:12 PM Page 65
