manualshive.com logo in svg

Yamaha CS2x, Owner'S Manual

The Yamaha CS2x Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides detailed instructions and guidance on operating the CS2x synthesizer. Get acquainted with all the features and functions of this powerful instrument with the help of this user-friendly manual.

Share
Download
background image

64

F

e

a

t

u

r

e

 R

e

f

e

r

e

n

c

e

U

t

ilit

y

 M
o

d

e

■

ASSIGN CTRL NO (Assign Control Number)

This lets you assign Control Change Numbers to controllers
such as the MODULATION wheel and SOUND CONTROL
knobs. This is mainly used to control external MIDI devices
connected to the CS2x via MIDI cables.

n

The main function of the SOUND CONTROL knobs will not be
changed.

n

You can designate whether the MODULATION wheel or the Foot
Controller is used for Scene Control (page 26).

n

The table below lists which controller the LCD abbreviations
correspond to.

n

In the Scene Control settings, you can choose from Mod. Wheel
(MODULATION wheel) or FootCtrl (FOOT CONTROLLER) to
determine the controller for Scene morphing.

Scene

SCENE 1 or 2 buttons (only for the Scene Control)

Controller

LCD

Modulation Wheel

MW

Sound Control Knob 1 (ATTACK)

Knob1

Sound Control Knob 2 (DECAY)

Knob2

Sound Control Knob 3 (RELEASE)

Knob3

Sound Control Knob 4 (ASSIGN 1/DATA)

Knob4

Sound Control Knob 5 (HPF CUTOFF)

Sound Control Knob 6 (LPF CUTOFF)

Sound Control Knob 7 (RESONANCE)

Knob5

Sound Control Knob 8 (ASSIGN 2)

Knob6

Knob7

Knob8

Footswitch connected to the FOOTSWITCH jack on the rear panel

FS

Foot Controller connected to the FOOT CONTROLLER jack on the rear panel

FC

Foot Volume pedal connected to the FOOT VOLUME jack on the rear panel

FV

Control Change Number

Name

Controller

■

BULK DUMP

This function is used for sending CS2x Performance data in
bulk to another CS2x or to a MIDI data storage devices such
as the Yamaha MIDI Data Filer MDF3. This is convenient for
backing up, saving or managing your important
Performance data.

Settings

Bulk Dump:

1Perf, All

n

To enable transmission, first connect the MIDI devices using MIDI
cables. (For details about setting up each device, see the respective
owner’s manuals for the external MIDI devices.) Also, you must
match the device number of the CS2x with the device number of
the external MIDI device (see DEVICE NO, above).

Bulk Dump Send

1. Select the type of data you want to “dump” to the external device

using the BULK DUMP [UP/DOWN] button.

1Perf:

Sends the Preset or User Performance data currently selected in

Performance mode.

All:

Sends all of the User Performance data as well as the System data

settings.

n

The CS2x does not transmit Multi data in bulk.

2. Press [ENTER] to execute the bulk dump operation. The word “End”

will appear in the LCD when the operation is completed, and the
LCD will return to the original display.

Bulk Dump Receive

The CS2x can receive Performance data from an external device, to load
it back into the CS2x in bulk. The CS2x stands ready to receive the data
when a Bulk Dump operation is executed by the external MIDI device.
The data that can be received will differ depending on the mode. (For
details about MIDI data format information, see the separate “Data List”
book.) You must match the device number of the CS2x with the device
number of the external MIDI device (see DEVICE NO, above.)

n

The CS2x can also receive CS1x bulk data. Depending on
wave and other data, the sound might be somewhat different.

VWX

7

YZ'

8

&

*

9

MNO

4

PQR

5

STU

6

DEF

1

GHI

2

JKL

NO/

QUICK PC

YES

3

ABC

0

SPACE

ENTER

cCS2x_Ref  12/10/98  5:12 PM  Page 64

Summary of Contents for CS2x





















































































Reviews:

No comments

Related manuals for CS2x

Yamaha PF-500 Reference Booklet preview
PF-500
Brand: Yamaha Pages: 36
Racal Instruments 3152 User Manual preview
3152
Brand: Racal Instruments Pages: 123
Kawai K1-II Owner'S Manual preview
K1-II
Brand: Kawai Pages: 58
Casio PT-80 Operation Manual preview
PT-80
Brand: Casio Pages: 32
Yamaha pf50 Owner'S Manual preview
pf50
Brand: Yamaha Pages: 22
Erica Synths Matrix Mixer User Manual preview
Matrix Mixer
Brand: Erica Synths Pages: 2
Boss SY-1000 Reference Manual preview
SY-1000
Brand: Boss Pages: 99
Tiptop Audio CIRCADIAN RHYTHMS User Manual preview
CIRCADIAN RHYTHMS
Brand: Tiptop Audio Pages: 48
Pittsburgh Modular Foundation 3.1 Manual And Patch Manual preview
Foundation 3.1
Brand: Pittsburgh Modular Pages: 43
Industrial Music Electronics HERTZ DONUT MARK III Operation Manual preview
HERTZ DONUT MARK III
Brand: Industrial Music Electronics Pages: 9
Generalmusic Promega 2 Owner'S Manual preview
Promega 2
Brand: Generalmusic Pages: 47
Generalmusic 271221 Owner'S Manual preview
271221
Brand: Generalmusic Pages: 224

Brands by name

Popular brands

Load more brands