Yamaha CS-R10, Systems Setup Manual

Page: 17 / 56

RIVAGE PM10 System Setup Guide
17
EQUALIZER
1
EQUALIZER [1-4]/[(5-8)] keys
Switch the EQ bands for which you want to make
settings.
Pressing both [1-4] and [5-8] keys simultaneously
will set the gain for all bands to 0 (FLAT).
2
EQUALIZER [ON] key
Switches EQ on or off.
3
EQUALIZER [SHELF] key
Switches peaking filter to shelving filter.
4
EQ display
Indicates parameters for each EQ band.
5
EQUALIZER [Q] knob
Specifies the Q value.
6
EQUALIZER [FREQUENCY] knob
Sets the frequency.
7
EQUALIZER [GAIN] knob
Sets the gain.
LPF/HPF
1 LPF/HPF [FREQUENCY] knobs
Specify the cutoff frequency of LPF and HPF
respectively.
2 LPF/HPF display
Indicates the LPF and HPF settings.
3 LPF/HPF [ON] keys
Switch the LPF and HPF on or off respectively.
4 LPF/HPF [SLOPE] keys
Switch the LPF and HPF slope settings respectively.
DCA/MUTE/INSERT
1 DCA ASSIGN LEDs
Indicate the assigned DCAs.
2
MUTE GROUP ASSIGN LEDs
Indicate the assigned Mute Groups.
3 INSERT [PLUG-INS] key
Enables you to recall a parameter setting screen for
the inserted plug-ins.
4
INSERT 1/2 [ON] keys
Switch the INSERT1 and INSERT2 on or off
respectively.
1
5
6
3
2
7
4
2
3
4
1
1
2
3 4