CVP-405/CVP-405PE/CVP-405PM
92
Press the [START/STOP] button and start the installations.
Then, the installation starts automatically.
It shows the following on LCD during installations.
3
2
1
Finish the installations, then it shows the following message on LCD.
Success:
Failure:
4
Turn off the power supply of the instrument.
5
Please refer to the error message table (page 93) if it will show an error message on LCD.
Verify the version
3
Turn on the power supply of the instrument with pressing
the [DIRECT ACCESS] switch simultaneously.
Version display mode starts.
1
2
Check that the version of Main Program on LCD is in
agreement with the version of install data.
3
Check that all items are set to OK.
4
The version display on LCD.
Model Name
: CVP-405 (E)
Main Boot
: 1.00
Sub Boot
: 1.03
Main Program
: 1.00
OK
Sub Program
: 1.00
OK
BitMap :
1.00 OK
LCD Patch
: 1.00
OK
Contents1 :
1.01
OK
Contents2 :
1.00
OK
Font :
1.00
OK
Wnn :
1.10
OK
Wave1 :
1.00 OK
MAC Address
00:A0:DE:25:76:49
Press [EXIT] to quit.
CVP-405 (Example)
If it checks that it is satisfactory, turn off the power supply
of the instrument.
5
Version Overview
Complete installation
The program installation is completion above.
Please refer to the trouble shootings (page 93) if an error will occur during installations.
4
Now installing. Please wait a moment ...
Updating has been completed.
Turn the power off.
Install error !
Please check installations data and try again.
* Follow the display on the screen for this operation.