167
CVP-202
●
Custom Style Mode
This message appears when you execute an operation, such as playback of disk software,
that will cause the Clavinova to delete data recorded to the internal memory.
➾
Press
YES
to delete the data recorded to the internal memory, then perform the
desired operation. Press the
NO
button if you want to keep the data.
This message appears if you try to select one of the following functions while editing song
data that has been recorded to the internal memory: Chord Sequence (page 121), Setup
Memory (126), or Song Name (page 127).
➾
Use the Song Copy function (page 142) to copy the song to a disk, delete the
CVP
MEMORY
song (page 144), then perform the desired operation using the data on
the disk.
This message appears for a few seconds when the Custom Style mode is engaged.
(See page 74.)
This confirmation prompt appears when you attempt to change the time signature of the
custom style. (See page 75.)
This confirmation prompt appears when you attempt to change the number of measures in
a section of the custom style. (See page 75.)
This confirmation prompt appears when you attempt to perform an operation that can only
be performed after the part has been deleted. (See page 76.)
This confirmation prompt appears when you store a custom style (page 79). It also ap-
pears if you try to change styles before you’ve stored the custom style (page 85).
➾
Select
OK
to store the custom style. Press
CANCEL
to return to the previous dis-
play without storing data.
This confirmation prompt appears when you attempt to exit the Custom Style mode before
storing the custom style. (See page 85.)
➾
Select
YES
to store the custom style. Press
NO
to exit without storing. Press
CAN-
CEL
to return to the previous display.
This message appears when the previous version of the custom style cannot be recalled
because the time signature has been changed. (See page 80.)
If you attempt to save a custom style to disk before storing it in memory, this message
prompts you to store the style before proceeding. (See page 83.)
This message appears if there is not enough internal memory capacity available to store
the custom style. (See page 84.)
This message appears if the style selected for deletion in the display shown above is the
source style on which the style currently being edited was based.
➾
Press
OK
to return to the preceding display, and select a different style for deletion.
This message appears when
DELETE
is selected in the display shown above.
➾
Select the style to be deleted and press the
OK
button. Press
CANCEL
if you do
not want to delete the style.
Messages
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
165
