Yamaha Clavinova CVP-105 Owner'S Manual Download Page 44

Page: 44 / 235

CVP-109/107/105/700

Press the

SPLIT POINT

button.

➔

The

SPLIT

function is highlighted.

Change the split point.
Use the data dial or [–] and [+] buttons to change the split point, or hold
down the

SPLIT POINT

button to move the split point to the right.

Press the [–] and [+] buttons simultaneously to restore the basic setting.

Using the Dual and Split Functions Simultaneously

Exiting the Split Mode

DUAL

SPLIT

REVERB

CHORUS

EFFECT

○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Playing Two Voices on Different Sides of the Keyboard — Split Mode

➔

The keyboard guide lamp corresponding to the selected Split Point

lights, and the key name is displayed by the

SPLIT POINT

func-

tion.

The [DUAL] and [SPLIT] buttons can be turned on simultaneously.

When you do so, the right range of the keyboard will play both the main
voice and the second voice.

Press the [SPLIT] button to exit Split mode.

➔

The [SPLIT] button lamp turns off, and the keyboard no longer plays

in Split mode.

Summary of Contents for Clavinova CVP-105












































































































































































































































Search results

Summary of Contents for Clavinova CVP-105

Reviews:

Related manuals for Clavinova CVP-105

Brands by name

Popular brands

Yamaha Clavinova CVP-105, Owner'S Manual

Search results

Summary of Contents for Clavinova CVP-105

Reviews:

Related manuals for Clavinova CVP-105

Brands by name

Popular brands