81
Appendix
Assembling the Clavinova
1.
Attach D to E and F.
1-1
Attach D to E and F by using four long screws
(6 x 25 mm).
1-2
Remove the twist tie from the folded pedal cord.
2.
Mount B.
2-1
Insert B between E and F as shown in the
illustration.
2-2
Place B onto the brackets.
2-3
Secure B using four 4 x 16mm thin screws from
the front.
CAUTION
Do not touch the speakers attached to B.
3.
Mount C.
3-1
Attach the C from the front.
3-2
Secure upper end of C using two long screws
(6 x 25 mm) from the rear.
3-3
Secure lower end of C using three thin screws
(4 x 16 mm) from the rear.
4.
Mount A.
4-1
Place your hands at least 15 cm from either end
of A to mount it.
4-2
Slide the guide pins
1
on each side of A into the
guide slots
2
on E and F respectively.
CAUTION
Be extra careful not to drop or let your fingers be pinched by the
main unit.
CAUTION
Do not hold the main unit in any position other than the position
specified above.
E
D
F
1-2
1-1
2-2
2-1-1
2-1-2
2-2
E
F
B
2-3
F
3-2
3-1-2
3-1-1
E
C
3-3
15cm
A
E
15cm
F
