34
MIDI/
TRANSPOSE
INOVA
ONE
E. PIANO
HARPSI-
CHORD
MIDI Functions
▼
Left-hand section plays
a Tone Generator bass
voice.
Right-hand section plays a
Clavinova piano voice.
SPLIT POINT
Z
Press the [HARPSICHORD] voice selector while holding down the
[MIDI/TRANSPOSE] button. The HARPSICHORD LED will flash.
X
While still holding the [MIDI/TRANSPOSE] button, press the key on
the keyboard at which you want to set the split point. The HARPSI-
CHORD LED will light continuously. The split-point becomes the first
key of the left-hand section.
C
Release the [MIDI/TRANSPOSE] button.
V
To return to the normal full-keyboard mode, hold the [MIDI/TRANS-
POSE] button and press the [HARPSICHORD] voice selector, then
release both buttons.
NOTE
• When the power is turned ON the default split point key — F
#
2 — will be
automatically selected. If a new split point is selected it remains active
until the power is turned OFF or a different split point is selected.
●
The MIDI Split & Right Local OFF Mode
In the CLP-156 either the right- or left-hand section of the keyboard can be assigned to control an external
keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in
the previous section. To assign the right-hand section to external tone generator control while playing the
Clavinova voices with the left hand, press the [VIBES] voice selector instead of the [HARPSICHORD] voice
selector when activating the Split mode (see the preceding section). All other operations are exactly the same as
described in the previous section.
MIDI/
TRANSPOSE
STRINGS
BES
ORGAN
●
Transmitting the Panel Settings
This function causes all the current Clavinova control settings (selected voice, etc) to be transmitted via the
MIDI OUT terminal. This is particularly useful if you will be recording performances to a MIDI sequence re-
corder which will be used to control the Clavinova on playback. By transmitting the Clavinova panel settings
and recording them on the MIDI sequence recorder prior to the actual performance data, the Clavinova will be
automatically restored to the same settings when the performance is played back.
Z
Hold down the [MIDI/TRANSPOSE] button.
X
Press the [STRINGS] voice selector.
C
Release the [MIDI/TRANSPOSE] button.
NOTE
• See page 39 for list of the panel settings transmitted by this function.
Factory Preset Recall
POWER
C
7
All dual mode, reverb, brilliance, touch sensitivity, pitch control, and
individual key tune settings can be restored to their original factory preset
(default) values by holding the C7 key while turning the [POWER] switch
ON.
