manualshive.com logo in svg

Yamaha CL1, Reference Manual

Share
Download
Yamaha CL1 Reference Manual Download Page 138

I/O device and external head amp

 Reference Manual

138

I/O device and external head amp

This chapter explains how to use an I/O device or an external head amp that is connected to the CL 
series console.
Before you proceed, use DANTE SETUP to specify the I/O devices that will be mounted. For details, 
refer to “

Mounting an I/O device on the Dante audio network

” on 

page 217

.

Using an I/O device

CL series consoles enable you to remotely control channel parameters of an I/O device (such as an Rio 
series product) connected to the Dante connector.
For details on connecting the CL series console to an I/O device, refer to the “Connecting to I/O 
devices” section in the separate Owner’s Manual.

I/O device patching

Here’s how an I/O device connected to the Dante connector can be patched to the Dante audio network.

1.

Connect the CL series console to an I/O device.

For details, refer to the “Connecting to I/O devices” and “Quick Guide” sections in the separate 
Owner’s Manual.

2.

In the function access area, press the I/O DEVICE button to access the I/O DEVICE 
screen.

3.

In the upper part of the I/O DEVICE screen, press the DANTE PATCH tab to access 
the DANTE PATCH field.

The DANTE PATCH field includes the following items.

1

I/O device list

This shows the ID number and model name of the I/O devices.
Press here to access the OUTPUT PATCH popup window, where you can specify patching from 
the console’s output ports to the I/O devices.

2

DANTE SETUP button

Press this button to open the DANTE SETUP popup window, in which you can make settings for 
the audio network.

3

DANTE INPUT PATCH button

Press this button to open the DANTE INPUT PATCH popup window, in which you can select any 
of 64 channels that will be input from the I/O devices to the console.

4

OUTPUT PORT SETUP button

Press this button to access the PATCH VIEW 1 tab of the OUTPUT PORT popup window, where 
you can choose the 64 channels that will be output from the console’s output ports to I/O devices.

4.

To specify the 64 channels that will be input from the I/O devices to the console, 
press the DANTE INPUT PATCH button.

The DANTE INPUT PATCH popup window will appear. This popup window includes the 
following items.

1

2

3

4

Summary of Contents for CL1






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands