Yamaha CK88, Owner'S Manual, Page: 23 / 80

Panel controls
CK88 CK61 Owner’s Manual
17
N
DELAY [ON/OFF] button
DELAY [TYPE] button
DELAY [DEPTH] knob
DELAY [TIME] knob
Use the [ON/OFF] button to turn the Delay on or off.
Use the [TYPE] button to select a type, the [DEPTH]
knob to set the delay depth, and the [TIME] knob to
adjust the delay length.
O
REVERB [ON/OFF] button
REVERB [TYPE] button
REVERB DEPTH knob
Use the [ON/OFF] button to turn the Reverb on or off.
Use the [TYPE] button to select a type and the REVERB
DEPTH knob to adjust the reverb depth.
P
EQUALIZER slider
For adjusting the Master EQ. The lamp turns on when
the slider value is set to a value other than 0.
Set the Frequency for each type from the [MENU]
button

General

System

Master EQ (page 36).
EQUALIZER settings are stored to a Live Set Sound if
Live Set EQ is set to On (page 30).
The Live Set EQ setting is changed from the [SETTINGS]
button

Sound

Common

Live Set EQ (page 30).
Type Description
Digital
Delay Clean digital delay
Use the [DEPTH] knob to adjust the depth and
feedback level, and the [TIME] knob to adjust the
delay time.
Analog
Delay Delay with warm analog sound
Use the [DEPTH] knob to adjust the feedback level
and the [TIME] knob to adjust the delay time.
Cross
Delay Delay that crosses the delay sound from left to right
and from right to left
Use the [DEPTH] knob to adjust the depth and
feedback level, and the [TIME] knob to adjust the
speed.
Tempo
Delay A special delay that syncs to the tempo of the song.
The delay is applied by specifying the Tempo (
Tempo
Delay Time ) and the note length.
The initial value is 1/4 (quarter note).
Use the [DEPTH] knob to change the delay depth
and feedback level, and the [TIME] knob to adjust
the delay tempo.
Another intuitive way of setting the tempo is to tap
the [ENTER] button at least three times.
Tempo Delay Time can be set by using the [TIME]
knob while holding down the [ENTER] button
(page 42), or from the [SETTINGS] button

Sound

Common

Tempo Delay Time .
Type Description
Hall
Reverb Simulates the sound of a concert hall.
Room
Reverb Simulates the sound of a room.
Plate
Reverb Simulates the sound of a plate reverb.
[HIGH] Gain for the high-frequency band (500 Hz–16 kHz)
[MID] Gain for the mid-frequency band (100 Hz–10 kHz)
[LOW] Gain for the low-frequency band (32 Hz–2 kHz)
*
(
D
E
&
K L
O
P
M
J
N
^
C
I
$
%