Advanced settings
CK88 CK61 Owner’s Manual
36
Entire instrument (MENU button)
From the [MENU] button, you can configure various parameters and functions that affect the entire instrument.
The changes made here will be stored in the CK.
NOTICE
After the value has been changed, the setting will be saved when the operation goes back to the Top screen.
Changes will not be saved if the CK has been turned off before the operation has gone back to the Top screen.
Operation
1.
Press the [MENU] button.
2.
Use the VALUE buttons and Encoder dial to select an item, and then press the [ENTER] button.
NOTE
You can also use the LIVE SET buttons [1] to [6] to select the item. The LIVE SET buttons [1] to [6] correspond to the items shown on the display
in order from the top. The buttons light up when this feature is available.
3.
Use the VALUE buttons and Encoder dial to change the value, and then press the [ENTER] button.
When the setting has been changed, the operation goes back to the previous screen for selecting the menu item.
General
Function name
Description
System
Master Tune
Determines the tuning for the entire instrument.
Settings:
414.72 Hz–466.78 Hz
Default:
440.00 Hz
Master EQ
Sets the
Master EQ
.
High Frequency
Sets the frequency for the high band.
Settings:
500 Hz–16 kHz
Mid Frequency
Sets the frequency for the mid-band.
Settings:
100 Hz–10 kHz
Low Frequency
Sets the frequency for the low band.
Settings:
32 Hz–2.0 kHz
Speaker
Speaker EQ
Selects the optimal sound quality of the built-in speakers for setting the CK on a
keyboard stand where the bottom of the CK is open (
Normal
) or for setting on the table
where the bottom of the CK is covered (
Table
).
Settings:
Normal
,
Table
Default:
Normal
Speaker Mute
Selects to mute the built-in speakers automatically (
Auto
) or to mute the built-in
speakers manually using the SPEAKERS switch (
Manual
) when the headphones are
connected.
Settings:
Auto
,
Manual
Default:
Auto
Auto Power Off
Switches the
Auto Power Off
function setting.
•
Disable
: The CK is not automatically turned off.
•
Enable
: The CK is turned off automatically after being inactive for 30 minutes.
•
Auto
: The
Auto Power Off
function is disabled while the AC adaptor is being used, and
enabled while batteries are being used.
Default:
Auto
Power On Sound
Selects which Live Set Sound is automatically called up when the CK is turned on.
Default:
1-1
Summary of Contents for CK88
Page 1: ...English Français Español ...
Page 11: ...CK88 CK61 Owner s Manual 5 MEMO ...
Page 78: ......
Page 79: ......
