Yamaha CDX-E200, Service Manual

Page: 1 / 33

CDX-E200
CDX-E200
1 0 0 7 4 5
SERVICE MANUAL
CDX-E200
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherant to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that all service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact
the distributor's Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have accumu-
lated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT:
Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
ERROR MESSAGE ............................................... 10–11
IC DATA ................................................................ 12–16
DISPLAY DATA .......................................................... 17
BLOCK DIAGRAM ................................................ 18–19
PRINTED CIRCUIT BOARD ................................ 20–23
IC BLOCK ............................................................. 24–25
PIN CONNECTION DIAGRAM ................................... 25
SCHEMATIC DIAGRAM ............................................. 26
PARTS LIST .......................................................... 27–35
■
CONTENTS
TO SERVICE PERSONNEL ..................................... 1–2
PREVENTION OF ELECTROSTATIC DISCHARGE TO
ELECTROSTATICALLY SENSITIVE DEVICES ......... 2
REAR PANELS ............................................................. 3
SPECIFICATIONS ......................................................... 3
INTERNAL VIEW .......................................................... 4
DISASSEMBLY PROCEDURES .............................. 4–5
STANDARD OPERATION CHART .......................... 6–7
TEST MODE .............................................................. 8–9
CRX-E200 is composed of RX-E200 and
CDX-E200. This is a service manual for
the CDX-E200.
For service manuals of RX-E200, please
refer to the service manuals with the
following publication numbers :
RX-E200 100742
For the system operation, please refer
to Service Manual for the RX-E200.
MINI COMPONENT SYSTEM
CRX-E200