Yamaha BLASTER YFS200N Owner'S Manual Download Page 123

Page: 123 / 153

EBU00601

Parking brake adjustment

Parking brake adjustment may be required if the

parking brake does not hold properly.

1. Loosen the locknut of the parking brake

cable.

1. Adjusting bolt

2. Locknut

2. Turn the adjusting bolt until there is little or

no free play.

3. Tighten the locknut.

8-23

POTENTIAL HAZARD

Operating with improperly adjusted

brakes.

WHAT CAN HAPPEN

The brakes could malfunction, causing

reduced braking performance. This could

increase the chance of a collision or acci-

dent.

HOW TO AVOID THE HAZARD

After adjusting the parking brake, block

the rear of the machine off the ground and

spin the rear wheels. Check to make sure

there is no brake drag. If brake drag is

noticed, perform the adjustment again.

WARNING

Summary of Contents for BLASTER YFS200N


























































































































































Search results

Summary of Contents for BLASTER YFS200N

Reviews:

Related manuals for BLASTER YFS200N

Brands by name

Popular brands

Yamaha BLASTER YFS200N, Owner'S Manual

Search results

Summary of Contents for BLASTER YFS200N

Reviews:

Related manuals for BLASTER YFS200N

Brands by name

Popular brands