manualshive.com logo in svg

Yamaha BLASTER YFS200N, Owner'S Manual

Share
Download
Yamaha BLASTER YFS200N Owner'S Manual Download Page 44

c

C

Be sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor
oils (often labeled “Energy Conserving”)
contain anti-friction additives which will
cause clutch and/or starter clutch slippage,
resulting in reduced component life and poor
engine performance.

EBU00498

Chain

Check the general condition of the chain and

check the chain slack before every ride.

Lubricate and adjust the chain as necessary.

(See pages 8-25~8-26 for details.)

EBU00151

Throttle lever

Check to see that the throttle lever operates cor-

rectly. It must open smoothly and spring back to

idle position when released. Repair as neces-

sary for proper operation.

EBU00152

Fittings and Fasteners

Always check the tightness of chassis fittings

and fasteners before a ride. Take the machine

to a Yamaha dealer or refer to the Service

Manual for correct tightening torque.

EBU00153

Lights

Check the headlight and taillight to make sure

they are in working condition. Repair as neces-

sary for proper operation.

EBU00155

Switches

Check the operation of the headlight switch,

engine stop switch and any other switches.

Repair as necessary for proper operation.

5-6

Summary of Contents for BLASTER YFS200N


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands