manualshive.com logo in svg

Yamaha BIG BEAR 4X4 YFM40FP, Owner'S Manual

Share
Download
Yamaha BIG BEAR 4X4 YFM40FP Owner'S Manual Download Page 49

5-5

EBU00886

Fuel 
Make sure there is sufficient gasoline in the
tank.

CAUTION:

_ 

Use only unleaded gasoline. The use of
leaded gasoline will cause severe damage
to the engine internal parts such as valves,
piston rings, exhaust system, etc. 

_

Your Yamaha engine has been designed to
use regular unleaded gasoline with a pump
octane number ([R+M]/2) of 86 or higher, or
research octane number of 91 or higher. If
knocking or pinging occurs, use a different
brand of gasoline or premium unleaded fuel.
Unleaded fuel will give you longer spark plug
life and reduced maintenance cost.

Gasohol 
There are two types of gasohol; gasohol con-
taining ethanol and that containing methanol.
Gasohol containing ethanol can be used if
ethanol content does not exceed 10%. Gaso-
hol containing methanol is not recommended
by Yamaha because it may cause fuel system
damage or vehicle performance problems.

1. Fuel level

2. Filler tube

Recommended fuel: 

UNLEADED GASOLINE ONLY 

Fuel tank capacity: 

Total: 

15 L (3.3 Imp gal, 4.0 US gal) 

Reserve: 

4.0 L (0.9 Imp gal, 1.1 US gal)

EE.book  Page 5  Tuesday, April 24, 2001  9:31 AM

Summary of Contents for BIG BEAR 4X4 YFM40FP









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands