Yamaha BIG BEAR 4X4 YFM40FP, Owner'S Manual

Page: 118 / 168

8-7
6. Clean the oil strainer and oil filter element
with solvent.
7. Check the O-ring for damage and re-
place it if damaged.
8. Install the oil filter element, and O-ring.
9. Install the oil filter cover by installing the
bolts.
10. Install the oil strainer, compression
spring and drain bolt. Tighten the drain
bolt to the specified torque.
CAUTION:
_
Before installing the drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
_
1. O-ring 2. Oil filter element
11. Fill the engine with oil, and then install the
dipstick.
CAUTION:
_
Be sure no foreign material enters the
crankcase.
_
Tightening torque:
Drain bolt (engine):
32 Nm (3.2 m·kgf, 23 ft·lb)
Filter cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lb)
Recommended oil: See page 5-7.
Oil quantity:
Periodic oil change:
2.9 L (2.6 lmp qt, 3.1 US qt)
With oil filter replacement:
3.0 L (2.6 lmp qt, 3.2 US qt)
Total amount:
3.5 L (3.1 lmp qt, 3.7 US qt)
EE.book Page 7 Tuesday, April 24, 2001 9:31 AM