manualshive.com logo in svg

Yamaha BIG BEAR 4X4 YFM40FP, Owner'S Manual

Share
Download
Yamaha BIG BEAR 4X4 YFM40FP Owner'S Manual Download Page 29

4-6

EBU00060

On command four-wheel drive switch
“2WD/4WD”
To change from two-wheel drive (2WD) to
four-wheel drive (4WD), stop the ATV and set
the switch to the 4WD position. To change
from four-wheel drive (4WD) to two-wheel
drive (2WD), stop the ATV and set the switch
to the 2WD position.

1. On command four-wheel drive swich “2WD/4WD”

WARNING

POTENTIAL HAZARD
Changing from 2WD to 4WD or from
4WD to 2WD while the ATV is moving.
WHAT CAN HAPPEN
The ATV handles differently in 2WD
than in 4WD in some circumstances.
Changing from 2WD to 4WD or from
4WD to 2WD while moving may cause
the ATV to unexpectedly handle differ-
ently. This could distract the operator
and increase the risk of losing control
and an accident.
HOW TO AVOID THE HAZARD
Always stop the ATV before changing
from 2WD to 4WD or vice-versa.

EE.book  Page 6  Tuesday, April 24, 2001  9:31 AM

Summary of Contents for BIG BEAR 4X4 YFM40FP









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands