Yamaha Badger YFM80M Owner'S Manual Download Page 60

Page: 60 / 141

Apparel

7-7

POTENTIAL HAZARD

Operating this ATV without wearing an

approved motorcycle helmet, eye protec-

tion and protective clothing.

WHAT CAN HAPPEN

Operating without an

approved motorcycle

helmet increases

your chances of a

severe head injury or

death in the event of

an accident.

Operating without

eye protection can

result in an accident

and increases your

chances of a severe

injury in the event of

an accident.

Operating without protective clothing

increases your chances of severe injury in

the event of an accident.

HOW TO AVOID THE HAZARD

Always wear an approved motorcycle hel-

met that fits properly.

You should also wear:

eye protection

(goggles or face shield)

gloves

boots

long-sleeved shirt or jacket

long pants

WARNING

Gloves

Goggles

Boots

Helmet

Protective
clothing

4EM91A_b 9/28/99 2:52 PM Page 7-7

Summary of Contents for Badger YFM80M














































































































































Search results

Summary of Contents for Badger YFM80M

Reviews:

Yamaha Badger YFM80M, Owner'S Manual, Page: 60 / 141

Search results

Summary of Contents for Badger YFM80M

Reviews: