Yamaha Badger YFM80M, Owner'S Manual, Page: 40 / 141

EBU00159
How to measure tire pressure
Use the low-pressure tire gauge.
NOTE:
The low-pressure tire gauge is included as
standard equipment. Make two measure-
ments of the tire pressure and use the sec-
ond reading. Dust or dirt in the gauge could
cause the first reading to be incorrect.
Set pressure with tires cold.
Set tire pressures to the following specifica-
tions:
1. Low-pressure tire gauge
5-8
4. Use no more than the following pres-
sures when seating the tire beads.
Front 250 kPa (2.5 kgf/cm 2 , 36 psi)
Rear 250 kPa (2.5 kgf/cm 2 , 36 psi)
Higher pressures may cause the tire to
burst. Inflate the tires very slowly and
carefully. Fast inflation could cause
the tire to burst.
20 kPa
(0.20 kgf/cm 2 ,
2.9 psi)
17 kPa
(0.17 kgf/cm 2 ,
2.5 psi)
23 kPa
(0.23 kgf/cm 2 ,
3.3 psi)
20 kPa
(0.20 kgf/cm 2 ,
2.9 psi)
17 kPa
(0.17 kgf/cm 2 ,
2.5 psi)
23 kPa
(0.23 kgf/cm 2 ,
3.3 psi)
Front
Rear
Recommended
pressure
Minimum Maximum
q
4EM91A_a 9/28/99 2:50 PM Page 4-19