manualshive.com logo in svg

Yamaha Badger YFM80M, Owner'S Manual, Page: 133 / 141

Share
Download
Yamaha Badger YFM80M Owner'S Manual Download Page 133

EBU00430

NOISE REGULATION

TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED:

Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering

inoperative by any person other than for purposes of maintenance, repair, or replacement of

any device or element of design incorporated into any new vehicle for the purpose of noise

control prior to its sale or delivery to the ultimate purchaser or while it is in use or (2) the use of

the vehicle after such device or element of design has been removed or rendered inoperative

by any person.

“AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS LISTED

BELOW.”

These acts include tampering with the following systems; i.e., modification, removal, etc.

11-1

Exhaust system 

Muffler
Exhaust pipe
Silencer

Air cleaner case
Air cleaner element
Intake duct

Intake system

4EM91A_c  9/28/99 2:53 PM  Page 8-39

Summary of Contents for Badger YFM80M














































































































































Reviews:

No comments