23
Version 2.0 Manual Supplement
Reference
This section explains all functions of the pages that were added in
AW4416 version 2.0.
QUICK REC screen
Quick Rec 2 page
Visually patching input sources to tracks
Function
Individually patch 16 input sources to audio
tracks 1–16, and make settings for simulta-
neous recording in one operation.
Key operation
• [QUICK REC] key
→
[F2] (Quick Rec 2) key
• Repeatedly press the [QUICK REC] key until
the screen shown at the right appears.
Mouse operation
M button
→
QREC button
→
Quick Rec 2 tab
Screen functions
D
MIX.CH (Mixer channels)
This column shows the type of input sources
assigned to input channels 1–16. The
(jack)
symbol displayed at the right of this area indicates
the direct output of each input channel.
When you move the cursor to the jack symbol and
press the [ENTER] key, the input channel for that
row will be selected for operations, and will be
highlighted. To cancel your selection, press the
[ENTER] key once again.
To change the input source assignment, move the
cursor to the numerical box for each input channel
and turn the [DATA/JOG] dial. The following input
sources can be assigned.
• AD 1–AD 8..... Input signals from the INPUT 1–
8 jacks
• SL1-1–SL1-8 ... Inputs 1–8 of an I/O card (slot 1)
• SL2-1–SL2-8 ... Inputs 1–8 of an I/O card (slot 2)
• DIN L/DIN R....... L/R channels of the DIGITAL
STEREO IN jack
• SMP 1–SMP 8...... Sampling pads 1–8
• MET..................... Internal metronome
E
Patch cables
This area shows virtual patch cables that connect
the direct outputs of input channels 1–16 (MIX.CH
column) to recorder inputs 1–16 (REC.TR column).
To connect a patch cable, move the cursor to a
MIX.CH jack and press the [ENTER] key. Then
move the cursor to a REC.TR jack and press the
[ENTER] key. (You can make the same connection
by performing these steps in the opposite order.)
Use the CLEAR button (
6
) to defeat an individual
patch cable, or the ALL CLEAR button (
5
) to
defeat all patch cables.
6 7
1
3
2
4
5
