En
43
XLR jacks
Transmit analog audio signals. Use an XLR balanced cable.
XLR input jacks
Match the pins and insert the “male” connector of the XLR
balanced cable until you hear a click.
X
When disconnecting the cable from the unit, hold down the PUSH button
on the unit and then pull the connector out.
XLR output jacks
Match the pins and insert the “female” connector of the XLR
balanced cable until you hear a click.
Y
When disconnecting the cable from the unit, hold down the lever of the
connector and then pull it out.
About the XLR jacks
• The pin assignments for the XLR jacks of the unit are shown
below. Before connecting an XLR balanced cable, refer to the
instruction manual of your device and verify that its XLR jacks
are compatible with the pin assignments.
AUDIO 4
R
XLR balanced cable (male)
CENTER
PRE OUT
XLR balanced cable (female)
2. HOT
1. GND
3. COLD
XLR input jacks
XLR output jacks
1. GND
2. HOT
3. COLD
