Yamaha Aventage MusicCast RX-A1070BL Owner'S Manual Download

Page: 45 / 172

Measuring at one listening position
(single measure)

When “Multi Position” is set to “No”, follow the procedure below for

measurement. It takes about 3 minutes to perform the measurement.

To start the measurement, use the cursor keys to select

“Measure” and press ENTER.

The measurement will start in 10 seconds. Press ENTER again to

start the measurement immediately.

To cancel the measurement temporarily, press RETURN.

The following screen appears on the TV when the measurement

finishes.

If any error message (such as E-1) or warning message (such as W-1) appears, see

“Error messages” (p.49) or “Warning messages” (p.50).

To check the measurement results, select “Result”. For details, see “Checking

the measurement results” (p.47).

Use the cursor keys to select “Save/Cancel” and press

ENTER.

To save the measurement results, use the cursor keys

(

) to select “SAVE” and press ENTER.

The adjusted speaker settings are applied.

To finish the measurement without saving the result, select “CANCEL”.

Use the cursor keys (

) to select “YES” or “NO” to

enable/disable YPAO Volume and press ENTER.

• If YPAO Volume is enabled, the high- and low-frequency levels are

automatically adjusted according to the volume so that you can enjoy natural

sounds even at low volume.

• You can also enable/disable YPAO Volume in “YPAO Volume” (p.107) in the

“Option” menu.

Disconnect the YPAO microphone from the unit.

This completes optimization of the speaker settings.

Caution

The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).

ENTER

RETURN

POP-UP/MENU

TOP MENU

AUDIO

V-AUX

BLUETOOTH

NET

PHONO

USB

TUNER

SCENE

MUTE

OPTION

SCREEN

DISPLAY

MODE

MOVIE

MUSIC

INFO

SLEEP

ENT

PRESET

TUNING

VOLUME

PROGRAM

HDMI OUT

PARTY

BAND

SUR. DECODE STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

POP-UP/MENU

TOP MENU

AUDIO

V-AUX

BLUETOOTH

NET

PHONO

USB

TUNER

SCENE

MUTE

OPTION

SCREEN

DISPLAY

MODE

MOVIE

MUSIC

INFO

SLEEP

ENT

PRESET

TUNING

VOLUME

PROGRAM

HDMI OUT

PARTY

BAND

SUR. DECODE STRAIGHT

ENHANCER PURE DIRECT

MEMORY

MAIN

ZONE 2

ENTER

RETURN

Cursor keys

Summary of Contents for Aventage MusicCast RX-A1070BL













































































































































































Search results

Summary of Contents for Aventage MusicCast RX-A1070BL

Reviews:

Related manuals for Aventage MusicCast RX-A1070BL

Brands by name

Popular brands

Yamaha Aventage MusicCast RX-A1070BL, Owner'S Manual

Search results

Summary of Contents for Aventage MusicCast RX-A1070BL

Reviews:

Related manuals for Aventage MusicCast RX-A1070BL

Brands by name

Popular brands