background image

18

En

Specifications

* Specifications are subject to change without notice.

This system employs new technologies and algorithms that make it possible to achieve 7-channel surround 
sound with only front speakers, and without using wall reflections.

“UniVolume” is a trademark of Yamaha Corporation.

Bluetooth

 is a registered trademark of the 

Bluetooth

 SIG and is used by Yamaha in accordance with a 

license agreement.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are 
trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and 
worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered 
trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes 
software. © DTS, Inc. All Rights Reserved.

“Blu-ray Disc™”, “Blu-ray™”, and the logos are trademarks of the Blu-ray Disc Association.

Item

Sound Bar (ATS-1520)

Amplifier 
Section

Maximum Rated 
Output Power

Front L/R  30 W x 2 ch

Subwoofer  60 W

Front 
Speaker 
Section

Type

Acoustic suspension type 
(Non-magnetic shielding type)

Driver

6.5 cm (2-1/2") cone x 2

Frequency 
Response

150 Hz to 22 kHz

Subwoofer 
Section

Type

Bass reflex type 
(Non-magnetic shielding type)

Driver

8.5 cm (3-1/4") cone x 2

Frequency 
Response

45 Hz to 150 Hz

Decoder

Supported audio 
signal (TV, BD/
DVD)

PCM (2ch)
Dolby Digital
DTS Digital Surround

Input Jacks

Digital (Optical)

1 (TV)

Digital (Coaxial)

1 (BD/DVD)

Analog (RCA)

1 (ANALOG)

Analog 
(Mini-plug)

1 (PORTABLE)

Output Jack

Analog (RCA)

1 (SUBWOOFER OUT)

Bluetooth

Bluetooth

 

version

Ver. 2.1 +EDR

Supported 
protocols

A2DP

Supported 
codecs

SBC, AAC

Wireless output

Bluetooth

 Class 2

Maximum 
communication 
distance

10 m ([33 ft] without obstructions)

General

Power Supply

U.S.A. and Canada models: AC 120 V, 60Hz
Taiwan model: AC 110 V, 60Hz
Other models: AC 220—240 V, 50/60Hz

Power 
Consumption

22 W

Standby Power 
Consumption

Less than 0.5 W

Dimensions 
(W x H x D)

1200 x 90 x 128 mm (not including stands and 
brackets)
(47-1/4" x 3-1/2" x 5")

1200 x 108 x 136 mm (including stands and brackets)
(47-1/4" x 4-1/4" x 5-3/8")

Weight

4.8 kg (10.6 lbs)

Summary of Contents for ATS-1520























Reviews: